When a heat pump stops heating or an air conditioner starts blowing warm air in the middle of a South Carolina summer, the visit itself is where the answer comes from. The technician who comes out looks at the equipment, checks the refrigerant charge, tests the components, and tells you what was found before any repair is approved. That sequence matters. A diagnosis based on what the system is actually doing is worth more than a guess made over the phone, and it is what every visit in Ladson is built around.
We handle the full range of heating and cooling work for homes and rental properties across this town. Whether the system is a heat pump that has never been serviced or a central AC that has been limping through the last few cooling seasons, the call is where it starts. We cover Ladson for AC repair, heating and heat pump service, ductwork, thermostats, and full system installation and replacement.
Call (854) 296-6595 to get a quote. We are available every day from 5:30 AM to 8:30 PM.
The price on an HVAC job is shaped by what the diagnostic turns up, not by what the system looked like before anyone opened it. A refrigerant leak that has been slow and gradual lands differently than a failed capacitor. A blower motor that is drawing too much current costs more to address than a thermostat that needs recalibration. What has to be reached inside the equipment, how long the repair takes, and whether the parts involved are straightforward to source all factor in.
The bigger question on older equipment is whether repair is the right answer at all. A system that has needed attention repeatedly in a short period, or one that is losing efficiency faster than the utility bill can absorb, may be a better candidate for replacement than another round of parts. That calculation is made with the diagnostic findings in front of both of us, not before the visit happens.
The price is confirmed before anything is scheduled. When you call, you find out what the visit covers and what the rate is. Ask what the quote includes and you get a straight answer.
Call (854) 296-6595 to get started.
The air handler is the indoor half of the system, and the blower motor inside it is what moves conditioned air through the ductwork and into the living space. When a blower motor starts to fail, the signs show up as reduced airflow at the registers, unusual noises from the indoor unit, or a system that runs but does not move enough air to reach the set temperature. A visit covers the motor, the capacitor that starts it, and the condition of the evaporator coil sitting upstream of the airflow. A dirty coil reduces heat transfer and puts extra strain on everything downstream.
Standing water near the air handler or the indoor unit is worth calling about promptly. The most common cause is a blocked condensate drain line, which prevents the moisture the system pulls from the air from draining away properly. Left unaddressed, it can damage the equipment or the surrounding area. A service call covers the drain line, the condensate pan, and the condition of the evaporator coil, which can contribute to overflow when it is heavily fouled.
In this part of the Southeast, heat pumps handle most of the heating and cooling load in residential homes. A single unit that runs in both directions is a practical fit for a climate where hard freezes are rare and the cooling season is long. When a heat pump reaches the end of its service life, replacement starts with sizing the new unit to the property. The square footage, the insulation, the window area, and the layout of the home all factor into that calculation. Load calculations done properly on a replacement determine whether the new system runs efficiently or fights the house from the first season.
A system that will not start is a different problem from one that starts but underperforms. Common causes include a failed capacitor, a tripped safety switch, a fault in the low-voltage control wiring, or a compressor that has seized. Each of those points to a different repair path, and the diagnostic is what separates them. If the system will not respond to the thermostat at all, that detail is worth mentioning when you call so the visit can be scoped with the right preparation.
The visit starts with a look at the equipment as it is running, or at what the system does when it is asked to run. Refrigerant pressure, electrical readings, airflow, and the condition of the coil and the condensate system are all part of a thorough check. A system check ends with the readings reviewed with you. Nothing is approved without that conversation first.
If the diagnostic turns up something beyond the original scope, that is discussed before the work goes further. The customer decides what happens next with the full picture in front of them, not partway through a repair they did not agree to.
We'll handle the system so you don't have to.
Replacing a system with the same capacity as the one that came out is a common shortcut, and it is one that produces common problems. A home that has had insulation added, windows replaced, or a room addition built onto it has different heating and cooling demands than it did when the original equipment was installed. A system that is too large for the actual load short-cycles, meaning it reaches temperature quickly and shuts off before it has run long enough to manage humidity properly. In a region where humidity is the signature problem, a short-cycling system leaves the air feeling damp even when the temperature reads correctly.
Sizing a replacement properly means running the numbers on the property as it currently stands. That is what load calculations are for, and it is what separates an installation that performs well from one that creates new complaints. Older equipment is assessed on its own merits before any replacement is recommended. If a repair extends the useful life of the existing system at a cost that makes sense, that is the honest answer.
When the system goes down entirely, no cool in the peak of the cooling season or no heat on a cold morning, those calls are taken every day from 5:30 AM to 8:30 PM. The person who answers can scope an emergency visit on the phone and tell you what the visit covers before anyone comes out. If you manage a rental property and a tenant has no cooling, call the same number and describe the situation.
For a business that has to stay open or a rental unit with a tenant in place, the visit is arranged to fit the situation. Access details and scheduling constraints are worked through on the call so the visit can be set up correctly from the start. If the property needs to be accessed without someone present, that is worth raising when you book.
You book it. We fix it. Simple as that.
Running through these takes a few minutes and occasionally turns out to be the whole answer. What each job covers is written out on our list of HVAC services.
If the system still will not respond after those checks, call (854) 296-6595 and describe what you are seeing. That information helps scope the visit before anyone comes out.
We cover Ladson and the communities around it, including Sangaree, Lincolnville, Goose Creek, North Charleston, and the broader stretch of the Charleston metro.
If you are in this part of the area and are not sure whether your address falls within our coverage, call (854) 296-6595 and we will confirm it on the call.
The work is handled locally, scoped on the phone, and scheduled to fit the situation at the property.
Either the tenant or the property owner can call (854) 296-6595 to report the situation and get a visit scoped.
It helps to know who is authorizing the work before the visit is scheduled, since the price is confirmed and the scope is agreed before anything starts. If you are a tenant, it is worth letting the property owner know at the same time so there is no confusion about who is approving the repair.
In most cases, yes. Duct sealing is typically done from inside the duct system or at accessible joints in the attic, crawl space, or mechanical room, without cutting into finished walls. Where access is limited, we assess what is reachable and work from there. The scope of a duct sealing job is confirmed on the visit.
Often yes. When you call, the person who answers can ask about the symptoms, the equipment type, and how the system has been behaving to narrow down the likely cause before anyone comes out. That does not replace the diagnostic, but it helps scope the visit and confirm what it will cover.
Replacing only one half of a matched system is sometimes done, but it carries trade-offs. Mismatched indoor and outdoor equipment can reduce efficiency and may cause the system to fall short of its rated performance. We assess the situation on the visit and give you a clear picture of what a partial replacement involves compared to replacing the full system.
Homes in a town this size tend to run on equipment that has been in place for several years, and the most common calls involve heat pumps that are losing efficiency, air handlers with restricted airflow from dirty coils or clogged filters, and condensate drain lines that have blocked up over time. Ductwork that was never properly sealed is another common finding, particularly in homes where additions were built after the original system was installed. A diagnostic visit covers all of those and tells you exactly where the system stands.
Short cycling, where the system starts and stops more frequently than it should, often points to an oversized unit, a refrigerant charge that is off, a failing compressor, or a thermostat problem. It puts extra wear on the equipment and reduces efficiency. It is worth calling about rather than waiting to see if it corrects itself.
The repair-versus-replace question is the one that matters most on an older system, and it deserves a real answer based on what the diagnostic finds, not a guess made before anyone has looked at the equipment.
Call (854) 296-6595 and we will scope the job, confirm the price, and give you the information you need to make that call. We are available every day from 5:30 AM to 8:30 PM.
Reach out and we'll start at the unit.
HVAC service covers these nearby towns as well: Sangaree, North Charleston, Hanahan, Charleston, Moncks Corner.
See our full list of towns.
We cover the full range of heating and cooling work for Ladson homes, rentals, and commercial spaces, from a single repair visit to a complete system replacement. The table below lays out what each service includes, who it fits best, and a practical note to help you call with the right questions. Every job starts with a phone call to scope the work and confirm the price before anything gets scheduled.
Reach us every day from 5:30 AM to 8:30 PM at (854) 296-6595.
| Service | What's Included | When You Need It | What to Keep in Mind |
|---|---|---|---|
| Heat Pump Repair & Installation | Refrigerant charge and leak checkReversing valve and defrost cycleFull replacement with load calculation | Homeowners who need a repair or a full heat pump swap in a mild-winter climate | The South carries the largest share of heat pump installations in the country, and the surrounding area fits that pattern well. |
| Full System Installation & ReplacementMost Popular | Load calculation for correct sizingEquipment removal and disposalInstallation through final commissioning | Homeowners replacing an aging or failed system, or upgrading to higher-efficiency equipment | Sizing the replacement to the home's actual load, not just the old unit's tonnage, determines how efficiently the new system runs from day one. |
| Heating Repair & Service | Heat pump and air handler diagnosisBlower motor inspectionThermostat signal check | Homes that heat with a heat pump or electric air handler and have lost heat | Most Ladson-area homes heat with a heat pump rather than a gas furnace, so diagnosis starts at the outdoor unit and works inward. |
Call us at (854) 296-6595 any day from 5:30 AM to 8:30 PM and we will scope the job, answer your questions, and confirm the price before anything is scheduled.
(854) 296-6595